•PRESET/DISC control
The same as (GP/ALBM) +/– on the unit (push in and rotate).
•VOL (volume) control
The same as the volume control dial on the unit (rotate).
•SEEK/AMS control
The same as (SEEK)
The operative direction of the controls is factory- set as shown below.
To increase
To decrease
If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.
1While pushing the VOL control, press and hold (SEL).
You can connect optional Sony portable devices to the BUS AUDIO IN/AUX IN terminal on the unit. If the changer or other device is not connected to the terminal, the unit allows you to listen to the portable device on your car speakers.
Note
When connecting a portable device, be sure BUS CONTROL IN is not connected. If a device is connected to BUS CONTROL IN, “AUX” cannot be selected as source.
Tip
When connecting both a portable device and a changer, use the optional
1Press (SOURCE) repeatedly until “AUX AUDIO” appears.
Operate by the portable device itself.
Adjust the volume levelBe sure to adjust the volume for each connected audio device before playback.
1Turn down the volume on the unit.
2Press (SOURCE) repeatedly until “AUX AUDIO” appears.
3Start playback of the portable audio device at a moderate volume.
4Set your usual listening volume on the unit.
5Press the select button repeatedly until “AUX” appears, and rotate the volume control dial to adjust the input level (±6 dB).
14