Tip

The access lamp of the front panel is blinking while audio file is transferred.

4Disconnect the front panel from your computer.

Be sure to follow the operating method of your computer or OS when you disconnect the front panel from the computer.

Example for Windows XP

1Click the icon on the taskbar.

The “Safely remove USB Mass Storage Device” message appears.

2Click “Safely remove USB Mass Storage Device.”

The message “The ‘USB Mass Storage Device’ device can now be safely removed from the system” appears.

3Disconnect the USB cable.

5Attach the front panel to the main unit (page 5).

Notes on the USB cable

•Do not connect the USB cable with the front panel attached to the main unit.

•Do not attach the front panel to the main unit with the USB cable connected.

•Do not disconnect the USB cable or remove the front panel while an audio file is being transferred.

•Use of the GIGA PANEL with a USB hub or a USB extension cable is not guaranteed. Always connect the GIGA PANEL to your computer directly using the supplied USB cable.

Deleting audio files in the GIGA PANEL

Connect the GIGA PANEL to your computer, and delete audio files you want to delete, as you would from a removable disk (GIGA PANEL).

Radio

Storing and receiving stationsCaution

When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1Press (SOURCE) repeatedly until “TUN” appears.

To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, MW or LW.

2Press and hold (BTM) until “BTM” flashes.

The unit stores stations in order of frequency on the number buttons.

A beep sounds when the setting is stored.

Storing manually

1While receiving the station that you want to store, press and hold a number button ((1) to (6)) until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be replaced.

Tip

When a RDS station is stored, the AF/TA setting is also stored (page 10).

Receiving the stored stations

1Select the band, then press a number button ((1) to (6)).

Tuning automatically

1Select the band, then press (SEEK) –/+ to search for the station.

Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.

Tip

If you know the frequency of the station you want to listen to, press and hold (SEEK) –/+ to locate the approximate frequency, then press (SEEK) –/+ repeatedly to fine adjust to the desired frequency (manual tuning).

9