DD-LIGHT SYNC OUT jack

Connect the D-LIGHT SYNC controller. You need to connect the

D-LIGHT SYNC controller to a lighting device* (not supplied). The lighting device will react according to the control signals transmitted by the D-LIGHT SYNC controller upon receiving music source from the system. For details on the use of the D-LIGHT SYNC controller and lighting device, refer to the operating instructions supplied with the respective device.

D-LIGHT SYNC controller cord

*Refer to the operating instructions supplied with the D-LIGHT SYNC controller for the recommended lighting device.

Note

The lighting effect may be different depending on the connected lighting device or the type of music being played back.

EVOLTAGE SELECTOR

For models equipped with a voltage selector, set VOLTAGE SELECTOR to the position of your local power line voltage.

Depending on the model, the VOLTAGE SELECTOR may differ.

Brazil model only

Other models

VOLTAGE SELECTOR

VOLTAGE SELECTOR

127V

 

 

120V

 

 

 

 

220V

 

 

220V

 

220V

 

 

230-240V

 

 

 

 

 

 

FPower

Connect the power cord to a wall outlet. The demonstration appears in the display. When you press "/1, the system turns on and the demonstration automatically ends.

If the supplied adaptor on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adaptor).

Using the subwoofers

(MHC-GTX888 only)

You can use the subwoofers to enhance the bass.

Subwoofer A (SS-WG888A)

1Press SUBWOOFER ON/OFF on the subwoofer A to light up the indicator.

The subwoofers are turned on.

2Turn SUBWOOFER LEVEL on the subwoofer A to adjust the level.

14GB