For Manual Recording and Sound Mixing:
Press the function button (except TAPE) to select the source you want to record.
If you want to record your voice through the microphone only, you can do so by selecting the CD function and not playing any other source.
3 Set tape deck to stand by for recording.For
Press REC TO TAPE.
“TAPE” and “SYNC” light up and “REC” flashes in the display. “PUSH ENTER” appears in the display.
For Manual Recording and Sound Mixing:
Press REC TO TAPE.
“TAPE” lights up and “REC” flashes in the display.
•When recording from a disc, press
. or > repeatedly to select a track or file during recording pauses.
•To record a folder of MP3 files, press PLAY MODE on the remote
repeatedly until “
” lights up in the display. Then, press 
+/– repeatedly to select the folder you want.
While recording, you cannot listen to other sources.
For
Press ENTER. When the recording is completed, the disc and the tape stop automatically.
For Manual Recording:
Press ENTER, and then start playing the recording source.
If there is noise while recording from the tuner, reposition the respective antenna to reduce the noise.
For Sound Mixing:
Press ENTER, and then start playing the source and start singing or speaking into the microphone. Adjust the microphone volume by turning MIC LEVEL.
After you have finished, turn MIC LEVEL to MIN.
If acoustic feedback (howling) occurs, reduce the volume, move the microphone away from the speakers, or change the direction of the microphone.
To stop recordingPress x.
Notes
•You cannot eject the disc during
•If you connect or disconnect a microphone or headphone during recording, the sound may cut off for a moment.
•If FLANGER, DELAY or CHORUS sound effect is selected while recording, the selected sound effect will be recorded onto the tape.
Tip
When high level sound signals are input, the system automatically adjusts the recording level to prevent distortion of the recorded sound signals (Auto Level Control Function).
Operations Other