To change the AM tuning interval (Except for European model)

The factory setting for AM tuning interval is 9 kHz (or 10 kHz for some areas). Use the buttons on the unit for the operation.

1Press TUNER/BAND repeatedly to select AM band.

2Press "/1 to turn off the system.

3When demonstration appears, hold down ENTER and then press "/1.

The system turn on automatically. “AM 9K STEP” or “AM 10K STEP” appears in the display.

When you change the interval, all the AM preset stations are erased.

Tip

To improve broadcast reception, adjust the supplied antennas, or connect an external antenna.

To reduce static noise on a weak FM stereo station

Press FM MODE on the remote repeatedly until “MONO” lights up in the display.

There will be no stereo effect, but the reception will improve.

Transferring onto an USB device

You can transfer music from a sound source to an optional USB device by

connecting it to the (USB) port on the unit.

The audio format transferred by this system is MP3. The approximate size of the transferring is about 1 MB per minute of transferring time (except MP3 disc). The files those are transferred onto the USB device is for personal use only. See “Compatible USB devices with this system” (page 56) for a list of USB devices that

can be connected to this system.

There are three ways to transfer onto an USB device.

CD-USB Synchronized Transfer:

You can easily transfer an entire disc onto an USB device.

REC1 Transferring:

You can easily transfer a single track or file that is currently being played back onto an USB device.

Manual Transferring:

You can transfer just the portion you want from a sound source, including connected audio components.

1 Connect a transferable USBdevice to the (USB) port on the unit.

USB device

Continued l

Operations Basic

23GB