Playing a tape

You can use TYPE I (normal) tape.

1 Press TAPE (or FUNCTION on the remote repeatedly to select “TAPE”).2 Load a tape.

Push PUSH Z OPEN/CLOSE to open the deck.

Load a tape into the deck with the side you want to play back facing forward.

Push PUSH Z OPEN/CLOSE again to close the deck.

3 Press NX (or N on the remote).

The tape starts playing.

Other operations

To

Do this

Stop playback

Press x.

 

 

Pause playback

Press NX (or X on the

 

remote). Press NX (or

 

X on the remote) again to

 

resume playback.

Fast forward or

Press m or M. To

rewind

return to normal playback,

 

press NX (or N on the

 

remote).

Remove a tape

Push PUSH Z OPEN/

 

CLOSE when playback is

 

stopped.

Note

To erase content of the tape, do the recording in tape function.

Using optional components

1 Connect a TV or VCR to the VIDEO (AUDIO IN) L/R jacks using an audio analog cord (not supplied).

Connect an portable audio player to the AUDIO INPUT L/R jacks using an audio analog cord (not supplied).

2 Turn MASTER VOLUME counterclockwise (or press VOLUME – on the remote) to turn down the volume.

3 To listen to TV or VCR, press VIDEO (or FUNCTION on the remote repeatedly to select “VIDEO”).

To listen to portable audio player, press AUDIO (or FUNCTION on the remote repeatedly to select “AUDIO”).

4 Start playing the connected component.5 Turn MASTER VOLUME

(or press VOLUME +/– on the remote) to adjust the volume.

Operations Basic

29GB