Using the remote
Slide and remove the battery compartment lid, and insert the two supplied R6 (size AA) batteries, E side first, matching the polarities shown below.
| e |
E | E |
| |
e |
|
Notes
•If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
•With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.
•Batteries installed devices shall not be exposed to excessive heat such as sunshine, fire or the like.
Attaching the speaker pads
Attach the supplied speaker pads at each corner on the bottom of the speakers to stabilize the speakers and to prevent them from slipping.
When carrying the unit
Do the following procedure to protect the disc mechanism.
Use the buttons on the unit for the operation.
1Press "/1 to turn on the system.
2Press CD.
3Press OPEN/CLOSE Z to open the disc tray and remove the disc. If there are more than one disc in the disc tray, press DISC
4Press OPEN/CLOSE Z again to close the disc tray. Wait until “CD No Disc” appears in the display.
5Hold down CD and then press "/1 until “STANDBY” appears in the display. Then, “MECHA LOCK” appears in the display.
6Unplug the AC power cord.
Started Getting