The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor).
7(Except for European, Russian and Latin American models)Set the color system to PAL or NTSC depending on the color system of your TV.The color system is factory set to NTSC for region code 3 models, and PAL for other region code models. Each time you perform the procedure below, the color system changes as follows:
NTSC y PAL
Use buttons on the CD/DVD player for the operation.
1 Press ?/1 to turn off the system.
2 Press ?/1 again while holding down X. The system turns on and the color system is changed.
Note
When you play back a VIDEO CD recorded in a different color system from the one you set to the unit, the picture image may be distorted.
After inserting the batteries, ensure that you have the COMMAND MODE switch set to SYSTEM to use the system. When setting to TV, you can operate a Sony TV.
Operating a Sony TVYou can use the following buttons on the remote to operate a Sony TV.
To | Press |
Turn the TV on or off | TV ?/1 |
|
|
Switch the TV’s input | TV/VIDEO |
source between the TV and |
|
other input sources |
|
|
|
Change the TV channels | TV CH +/– or number |
| buttons* |
|
|
Adjust the volume of the | VOL +/– |
TV speaker(s) |
|
|
|
*For double digit number, press >10, then the number. (For example, press >10, then 2 and 5 for entering 25.)
Note
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.