Tape – Recording
Recording your favorite CD tracks on a tape
— CD-TAPE Synchro Recording
You can record a whole disc (VIDEO CD, CD, MP3) on a tape.
You can use TYPE I (normal) tape. The recording level is adjusted automatically. Use buttons on the CD/DVD player for the operation.
1 Load a recordable tape into deck B.
2 Press TAPE A/B to select deck B, then press nN repeatedly to select recording side. And press x to stop playback.
3 Press DVD and load a disc you want to record.
4 Press CD SYNC.
Deck B stands by for recording.
“REC” flashes.
5 Press DIRECTION on the remote repeatedly to select “g” to record on one side. Select “j” (or “RELAY”) to record on both sides.
6 Press z START.
Recording starts.
To stop recording
Press x.
To record a VIDEO CD/CD/MP3 by specifying track order
You can record only your favorite tracks using Program Play. Between steps 2 and 3, perform steps 1 to 5 of “Creating your own program” (page 19). When programming, make sure the playing time for each side do not exceed the length of one side of the tape.
Notes
•For all models, when you press CD SYNC in step 4, the surround effect automatically changes to either HP 2CH or LINK (see “Selecting the surround effect” on page 43).
•You cannot listen to other sources while recording.
Tips
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
•If you select both sides recording and the tape reaches the end of the front side