Timer
Falling asleep to music
— Sleep Timer
You can set the system to turn off after a certain time, so that you can fall asleep to music.
Press SLEEP.
Each time you press the button, the minute display (the
OFF t AUTO* t 90min t 80min t 70min
t… t 10min
*The system automatically turns off in 100 minutes or after the current disc or tape finishes playing.
Other operations
To | Do this |
Check the | Press SLEEP once. |
remaining time** |
|
|
|
Change the time | Press SLEEP repeatedly to select |
to turn off | the time you want. |
|
|
Cancel the Sleep | Press SLEEP repeatedly until |
Timer Function | “SLEEP OFF” appears. |
|
|
**You cannot check the remaining time if you select “AUTO”.
Tip
You can use the Sleep Timer, even if you have not set the clock.
Waking up to music
— Daily Timer
You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 12).
1 Press FUNCTION repeatedly to select the sound source you want to play.
•DVD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 19).
•TAPE: Load a tape.
•TUNER: Tune in the preset radio station (see “Listening to the radio” on page 37).
2 Press VOL +/– (or turn VOLUME on the CD/DVD player) to adjust the volume.
3 Press CLOCK/TIMER SET.
4 Press ENTER.
“ON” appears and the hour indication flashes.
5 Set the time to start playing.
Press M or m repeatedly to set the hour, then press ,.
The minute indication flashes.
Press M or m repeatedly to set the minute, then press ENTER.
6 Set the time to stop playing following the same procedure as step 5.
7 Press M or m repeatedly until the desired sound source appears.
Each time you press the button, the display changes cyclically as follows:
tTUNER y DVD PLAY T t TAPE PLAY T
8 Press ENTER.
The start time, the stop time, and the sound source appear in turn, before the original display returns.
9 Press ?/1 to turn off the system.
continued