Notes
•If DVD playback is paused for approximately one hour, the system automatically turns off.
•Depending on the DVD or VIDEO CD, some operations may be restricted.
•2 channel sound is heard when using headphones.
•During
•You cannot perform
•You cannot change the play mode during play.
•Some time may be needed to start playback of discs recorded in complex configurations such as many layers.
•The system can play MP3 (MPEG1 Audio Layer3) audio. The system cannot play audio tracks in MP3PRO format.
•This system can play Multi Session CDs when an MP3 audio track is located in the first session. Any subsequent MP3 audio tracks, recorded in the later sessions, can also be played back.
•Maximum number of albums on a disc: 99 (The maximum number of MP3 audio tracks that can be contained on an album is 250.)
•An album that does not include an MP3 audio track is skipped.
•If you put the extension “.MP3” to data not in MP3 format, the system cannot recognize the data properly and will generate a loud noise which could damage your speaker system.
•When the system cannot play MP3, remove the disc and select “CUSTOM SETUP” from the setup items. Then select “DATA CD PRIORITY” and set to “MP3” (page 25) and insert the disc again.
•The system can play to a depth of 8 directories.
Tip
When disc access takes a long time, set “DVD POWER ON” by DVD power manage function (page 37).
This system memorizes the point where you stopped the disc so you can resume from that point. Resume Play is not canceled when you turn off the system.
1While playing a disc, press x to stop playback.
“RESUME” appears in the display. If “RESUME” does not appear, Resume Play is not available.
2Press nN.
The player starts playback from the point you stopped the disc in step 1.
Notes
•You cannot perform Resume Play during Shuffle Play or Program Play.
•Depending on where you stopped the disc, the system may resume playback from a different point.
•Resume play is canceled when:
–you press x.
–you disconnect the mains lead.
–you open the disc tray.
–you change the play mode.
–you change the settings using the DVD DISPLAY or DVD SET UP button.
Playing a track by entering the track number (on the remote only)Press the number button(s) to enter the track number of the track you want to play. (To enter the MP3 audio track number, press ALBUM – or + repeatedly to select the desired album before entering the number.)
To enter a track number over 10
1Enter the corresponding digits. To enter 0, press 10/0.
2Press ENTER.
Example:To play track number 30, press 3 and 10/0, then press
ENTER.
To play MP3 track number 100, press 1, 10/0 and 10/0, then press ENTER.