Sony Model MHC-WZ8D Turning off the display, 49GB, — Power Saving Mode, Display, Other operations, To cancel Power Saving Mode

Other operations

To	Do this
Check the setting	1	Press CLOCK/TIMER
		SELECT.
	2	Press M or m repeatedly until
		“REC SELECT?” appears,
		then press ENTER.
Change the setting	Start over from step 1.
Cancel the timer	1	Press CLOCK/TIMER
		SELECT.
	2	Press M or m repeatedly until
		“TIMER OFF?” appears,
		then press ENTER.

Notes

•You cannot activate the Daily Timer and Timer recording at the same time.

•If you use the Timer recording and the Sleep Timer at the same time, the Sleep Timer has priority.

•If the system is on at the preset time, the Timer recording will not be activated.

•The volume is reduced to minimum during recording.

•Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time).

•Note that if the Timer Recording is set at the same time as the Daily Timer sound source is set to tape, the Timer Recording sound may be recorded onto the tape.

Display

Turning off the display

— Power Saving Mode

The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode).

Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears.

To cancel Power Saving Mode

Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows:

Demonstration display t Clock display* t No display (Power Saving Mode)

* “– –:– –” appears if you have not set the clock.

Note

You cannot perform the following operations in Power Saving Mode.

–setting the clock

–turning on the system by pressing the function buttons

Tips

•The timer continues to operate in Power Saving Mode.

•?/1 indicator lights up even in Power Saving Mode.

Display

49GB