Use a video cord to connect an optional component (such as a TV) to this jack. You can then output the video to the component from this system, and enjoy the video images of DVDs, etc. Make sure to match the color of the plugs and the connectors.
FS VIDEO OUT jackUse an S video cord (not supplied) to connect an optional TV to this jack. You can enjoy higher quality video images.
GCOMPONENT VIDEO OUT jacksUse a component cable (not supplied) to connect the video input of the TV or projector to these jacks. If your TV accept progressive format file signals, you must use this connection and set “COMPONENT OUT” to “PROGRESSIVE” in “Adjusting the TV screen” (page 26).
Listening to audio from a connected component
Use buttons on the CD/DVD player for the operation.
1 Connect the audio cords.See “Hooking up optional components” on page 54.
2 Press MD (VIDEO) to switch the function to MD or VIDEO.Start playing the connected component.
Note
If the sound is distorted or too loud when “VIDEO” is selected or you want to switch back to “MD”, repeat the operation described above to switch to “MD”.
Tip
If you cannot select “VIDEO” by pressing MD (VIDEO) repeatedly, hold down MD (VIDEO) and then press ?/1 while the power is on. The function will change from “MD” to “VIDEO”, and “VIDEO” will appear in the display. To change back to “MD”, repeat the same procedure.
Recording audio from a connected component
1 Connect the audio cords.
See “Hooking up optional components” on page 54.
2 Start recording manually.