Getting Started
Hooking up the system
Perform the following procedures 1 to 7 to hook up your system using the supplied cords and accessories. European model is used for illustration purpose.
AM loop antenna
FM lead antenna
CD/DVD player/Tuner
To front speaker (right)
To surround speaker (right)
To surround speaker (left)
PreparationPlace the components as shown below.
Amplifier/ | CD/DVD player/ |
Tape deck | Tuner |
1Connect the system control cables to the SYSTEM CONTROL connectors on the tape deck.
Connect to the same numbered jack in the order indicated on the rear panel.
To center speaker
Amplifier/Tape deck
To front speaker (left)
Note
The system cable is used to send signals and electricity between the components for interlinked operation. Be sure to insert the connector horizontally until it clicks into place. Otherwise the system will not operate correctly.
2Connect the speakers.Be sure to match the appropriate speaker cords from the speaker terminals to the corresponding SPEAKER terminals on the tape deck.
8GB