Messages do not appear on the screen in the language you want.
•Select the language you want for the
The language for the sound track cannot be changed.
•Multilingual tracks are not recorded on the DVD being played.
•The DVD prohibits changing the language for the sound track.
The subtitle language cannot be changed.
•Multilingual subtitles are not recorded on the DVD being played.
•The DVD prohibits changing the subtitles.
The subtitle cannot be turned off.
• The DVD prohibits turning off subtitles.
The angles cannot be changed.
•
•The DVD prohibits changing the angles.
Tuner
Severe hum or noise/stations cannot be received.
•Set the proper band and frequency (page 36).
•Connect the antenna properly (page 9).
•Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect a commercially available external antenna.
•The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully.
•Locate the antennas as far away from the speaker cords as possible.
•Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand.
•Try turning off surrounding electrical equipment.
•Set “DVD POWER OFF” by DVD power manage function (page 37).
A stereo FM program cannot be received in stereo.
• Press FM MODE until “MONO” disappears.
The tape does not record or play, or there is a decrease in sound level.
•The heads are dirty. Clean them (page 63).
•The record/playback heads are magnetised. Demagnetise them (page 63).
The tape does not erase completely.
•The record/playback heads are magnetised. Demagnetise them (page 63).
There is excessive wow or flutter, or the sound drops out.
•The capstans or pinch rollers are dirty. Clean them (page 63).
Noise increases or the high frequencies are erased.
•The record/playback heads are magnetised. Demagnetise them (page 63).
The tape does not record.
•No cassette is loaded. Load a cassette.
•The tab has been removed from the cassette. Cover the broken tab with adhesive tape (page 63).
•The tape has wound to the end.
After pressing nN, there is a mechanical noise, “Eject” appears in the display, and the unit enters standby mode automatically.
• Insert the cassette correctly.
If the system still does not operate properly after performing the above measures, reset the system as follows:
Use buttons on the CD/DVD player for the operation.
1Disconnect the mains lead.
2Reconnect the mains lead.
3Press x, EQ EDIT and ?/1 at the same time.
4Press ?/1 to turn on the system.
The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer.