Other operations
To | Do this |
Tune in a station | Follow the procedure described |
with a weak signal | |
| |
|
|
Set another station | Start over from step 2. After |
to the existing | step 5, press PRESET |
preset number | ./> on the CD/DVD |
| player) repeatedly to select the |
| preset number you want to store |
| the other station. |
|
|
To improve tuner reception
When tuner reception is poor, set CD/DVD player power off by DVD power manage function. DVD power is factory set to on. Use buttons on the CD/DVD player for the operation.
1Press DVD.
2Press ?/1 to turn off the system.
3Press ?/1 while holding x. “DVD POWER OFF” appears.
To set the DVD power on
Repeat the procedure above and “DVD POWER ON” appears.
Note
When “DVD POWER OFF” is selected, disc access time is increased.
To change the AM tuning interval (except for European, Russian and Middle Eastern models)
The AM tuning interval is
9kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding x, press ?/1. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Use buttons on the CD/DVD player for the operation.
Tips
•The preset stations are retained for half a day even if you disconnect the mains lead or if a power failure occurs.
•To improve the reception, adjust the supplied antennas or connect an external antenna.
Listening to the radio
You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first | Tuner | |
1 | Press FUNCTION repeatedly (or |
|
| TUNER/BAND on the CD/DVD player) to |
|
2 | switch the function to TUNER. |
|
Press BAND (or TUNER/BAND on the |
| |
| CD/DVD player) repeatedly to select |
|
3 | “FM” or “AM”. |
|
Press TUNING MODE repeatedly until |
| |
4 | “PRESET” appears. |
|
Press PRESET |
| |
| CD/DVD player) repeatedly to select |
|
| the desired preset station. |
|
Preset number
Frequency
continued