Recording on a connected component

Making a digital recording on an MD1 Connect an optical cable.

See “Hooking up optional components” on page 54.

2 Start recording.

Refer to the operating instructions provided with the connected component.

Note

When making a digital recording from the CD/DVD player of this system to an optional component (MD deck, etc.) connected to the DVD DIGITAL (OPTICAL) OUT jack, start the optional component recording in advance.

Making an analog recording

1 Connect the audio cords.

See “Hooking up optional components” on page 54.

2 Start recording.

Refer to the operating instructions provided with the connected component.

Note

Audio may be interrupted when:

–SOUND FIELD is pressed.

–the headphones are connected or removed.

–a microphone is connected or removed.

Making an analog recording from a VIDEO CD to a video tape

1 Connect optional audio cords from MD (VIDEO) OUT L/R jacks and the supplied video cord from VIDEO OUT jack to your VCR.

2 Start recording.

Refer to the operating instructions provided with the connected component.

Note

You cannot record from a VIDEO CD to an MD digitally. When you record from a VIDEO CD to an MD, make an analog recording on MD.

56GB

Troubleshooting

Problems and remedies

Should you encounter a problem with your system, do the following:

1Make sure the mains lead and speaker cords are correctly and firmly connected.

2Find your problem in the troubleshooting checklist below and take the indicated corrective action.

If the problem persists after doing all of the above, consult your nearest Sony dealer. In case of repairing, please bring the entire system set (except for the speaker) to the service station.

When the ?/1 indicator flashes

Immediately unplug the mains lead and check the following items.

•Are the system control cables connected correctly?

•If your system has a voltage selector, is the voltage selector set to the correct voltage? Check the voltage for your region, then make sure the voltage selector is set correctly.

•Are the + and – speaker cords short- circuited?

•Are you using the supplied speakers?

•Is anything blocking the ventilation holes on the rear of the system?

Check all the above items and fix any problems found. After ?/1 indicator stops flashing, reconnect the mains lead and turn on the system. If the indicator still flashes, or if the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer.