Others

Symptom

Cause

Solution

Your camera does not

• You are not using an “InfoLITHIUM” battery

p Use an “InfoLITHIUM” battery pack (page 121).

work.

pack.

 

 

• The battery level is low. (The E indicator

p Charge the battery pack (page 11).

 

appears.)

 

 

• The AC Adaptor is not connected securely.

p Connect it securely to the DC IN jack of your camera and to a

 

 

wall outlet (page 14).

 

 

 

The power is on, but the

• The built-in microcomputer is not working

p Disconnect, and then, after one minute, reconnect all power

camera does not work.

properly.

sources and turn on the camera. If this does not work, press the

 

 

RESET button on the bottom of the camera with a pointed

 

 

object, then turn the power on again. (This will clear the date

 

 

and time settings, etc.)

 

 

 

You cannot identify an

—

p Check the indicator (page 125).

indicator on the screen.

 

 

 

 

 

The lens gets fogged.

• Moisture condensation has occurred.

p Turn off the camera and leave for about an hour at room

 

 

temperature for the moisture to evaporate before use (page 120).

 

 

 

The lens does not move

• The battery pack is discharged.

p Replace it with a charged battery pack or use the AC Adaptor

when you turn off the

 

(pages 11 and 14).

camera.

 

 

 

 

 

A file error occurs when

• The image file has an error.

—

you play back a file.

• The image was not recorded correctly.

—

 

• The disc is dirty.

p Clean the disc (page 120).

 

• The disc may be scratched.

p Replace the disc.

 

 

 

106