Using an external power source

Using your camera abroad

DC IN jack cover

DC plug

1

AC Adaptor

 

,Open the DC IN jack cover and connect the AC Adaptor (supplied) to the DC IN jack of your camera.

Connect the DC plug with the v mark facing up.

•Connect the AC Adaptor to an easily accessible wall outlet (wall socket) close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

2To wall outlet (wall socket)

Power cord (mains lead)

1

2 AC Adaptor

,Connect the power cord (mains lead) to the AC Adaptor and then to a wall outlet (wall socket).

•When you have finished using the AC Adaptor, disconnect it from the DC IN jack of the camera.

•The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket), even if the unit itself has been turned off.

Power sources

You can use your camera in any country or region with the supplied AC Adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].

AC-L15A/L15B

•Do not use an electronic transformer (travel converter), as this may cause a malfunction.

14