Sony MVC-CD500 Using the self-timer, Set the mode dial to, Selecting a flash mode, To cancel the self-timerin the middle of the operation

Using the self-timer

60min 5.0M 101

96

M AF

1

,Turn the mode dial to , and press V () on the control button.

The (self-timer) indicator appears on the LCD screen.

•If the menu is currently displayed, press MENU first so that the menu disappears.

•You can also carry out this operation when the

mode dial is set to P, S, A, M, SCN or .

60min 5.0M FINE 101

96

M AF

0EV

F2.8 30

2

,Center the subject in the frame, and press the shutter button fully down.

The self-timer lamp (page 9) flashes and a beep sounds after you press the shutter button until the shutter operates (approximately 10 seconds).

To cancel the self-timer in the middle of the operation

Press V () on the control button again.

The indicator disappears from the LCD screen.

•If you press the shutter button while standing in front of the camera, the focus and the exposure may not be correctly set.

Selecting a flash mode

60min 5.0M 101

96

M AF

,Set the mode dial to , and press v ( ) on the control button repeatedly to select a flash mode.

Each time you press v ( ), the indicator changes as follows.

images still Shooting

27