Sony MVC-CD500 Adjusting the exposure, — EV adjustment, Mode dial: P/S/A/SCN, To reactivate auto focusing, bPress FOCUS to switch to focus preset

aSet the mode dial to P, S, A, M, SCN, or .bPress FOCUS to switch to focus preset.

Each time you press FOCUS, the setting changes in the following order. Focus preset

Y

AF range finder frame select

The focus is fixed and the 9 (manual focus) indicator appears.

cTurn the jog dial to select the desired focus setting.

You can select from the following distance settings: (Units: m)

0.1, 0.2, 0.3, 0.5, 0.8, 1.0, 1.5, 2.0, 3.0, 5.0, 7.0, 10, 15, and ∞ (infinity)

To reactivate auto focusing

Press FOCUS again so that the focus setting information disappears.

•Focus setting information is approximate, and should be used as a reference.

•If you point the lens up or down, the error will increase.

•When you select 0.1 m (4 inches) with the zoom set to the T side, you may not get a clear focus. In such cases, the focus setting information flashes. Press the zoom W button until the indicator stops flashing.

•The focus preset does not work properly when attaching a conversion lens (not supplied).

Adjusting the exposure

— EV adjustmentMode dial: P/S/A/SCN/

This lets you adjust the exposure value which is set by automatic adjustment. You can select values ranging from +2.0EV to –2.0EV in steps of 1/3EV.

Mode dial

Jog dial

DISPLAY/LCD BACK LIGHT ON/OFF

shooting image still Advanced

51