Notes

•The pause function cannot be turned on or off manually during synchro-recording.

•Do not switch the “SYNC REC” setting while recording. Recording may not be done properly.

•You cannot change the recording mode during recording.

•Even when there is no sound on the sound source, there may be cases when recording does not pause automatically during synchro- recording due to the noise level emitted from the sound source.

•If a silent portion is encountered for approximately 2 seconds during synchro- recording from a sound source other than a CD or an MD, a new track mark is automatically added at the point where the silent portion ends.

•Synchro-recording cannot be done if the connecting cord is not an optical cable, or if the cable is connected to the MIC (PLUG IN POWER) jack.

Adding track marks while recording

You can add track marks (track number) while recording to divide the material into separate parts.

. • REVIEW •

MENU/

AMS, > • CUE •

ENTER

AMS

 

TRACK

MARK

Adding track marks manually

1 While the recorder is recording, press

TRACK MARK.

Adding track marks automatically (Auto Time Mark)

Use this feature to add track marks automatically at 10-minute intervals when recording through the analog input connector or a microphone. This function is convenient when making a long recording, e.g., of a lecture or meeting.

1 While the recorder is recording or in recording pause, press MENU/

ENTER.

2 Press . or > until “REC SET” appears in the display, and then press

MENU/ENTER.

3 Press . or > until “TIME MARK” appears in the display, and then press MENU/ENTER.

24