Error message

Meaning/Remedy

 

 

NAME FULL

• The group setting cannot be made if group editing will cause the

 

total number of characters used in track names, group names and

 

disc name to exceed the maximum.

 

 

NO COPY

• You tried to make a copy from a disc that is protected by the Serial

 

Copy Management System. You cannot make copies from a

 

digitally connected source which was itself recorded using digital

 

connection.

 

 

, Use analog connection instead (page 22).

 

 

NO DISC

• You tried to play or record with no disc in the recorder.

 

, Insert an MD.

 

 

 

NO EDIT

• You tried to erase a group with a disc without group setting.

 

, You cannot erase groups with a disc with no groups.

 

• You selected “

: Set”, “ : Release”, or “Move” while

 

recording.

 

 

• You tried to erase a track, disc, or group while recording.

 

• You tried to erase a track mark to combine tracks the recorder

 

cannot combine (a track recorded in stereo and in mono, for

 

example).

 

 

• You tried to overwrite a track marks.

 

 

NO SET

• You tried to make the following settings while recording.

 

— Recording mode

 

— Selection of “

: REC” in menu

 

— Play mode while “End” appears in the display

 

 

NoOPERATE

• You tried to make the Auto Time Mark setting while recording

 

through digital connection.

 

• You tried to press X • PAUSE or TRACK MARK during synchro-

 

recording.

 

 

 

NO SIGNAL

• The recorder could not detect digital input signals.

 

, Make sure that the source is connected firmly (page 21).

 

 

P/B ONLY

• You tried to record or edit on a premastered MD (P/B stands for

 

“playback”).

 

 

, Insert a recordable MD.

 

 

PROTECTED

• You tried to record or edit on a MD with the tab in the record-

 

protect position (page 46).

 

, Slide the tab back.

 

 

READ ERR

• The recorder cannot read the disc information correctly.

 

, Reinsert the disc.

 

 

REC ERR

• Recording was not correctly done.

 

, Place the recorder at a place with no vibrations and record

 

again.

 

 

• The disc is soiled with an oil film or finger prints, is scratched, or is

 

not a standard disc.

 

, Try recording again with another disc.

 

 

 

54