Editing recorded tracks

You can edit your recordings by adding/ erasing track marks or changing the order of the recorded tracks.

Notes

•Premastered MDs cannot be edited.

•Close the record-protect tab on the side of the MD before editing

•When “TOC Edit” is flashing, the editing results are being recorded.

—Do not move or jog the recorder. —Do not disconnect the power source. —The lid becomes locked.

Adding a track mark

You can add track marks so that the part after the new track mark is counted as a new track. A total of 254 track marks can be added on one disc.

The track numbers will increase as follows.

1

2

3

4

 

Track marking

1 2 3 4 5

Track numbers increase

TRACK MARK

1 While recording, playing or pausing an MD, press TRACK MARK at the point you want to mark.

“MARK ON” appears in the display, and a track mark is added. The track number will increase by one.

Erasing a track mark

When you erase a regular track mark, the track numbers will change as follows.

Example

When combining track 2 and track 3

1

2

3

4

 

Erase a track mark

123

Track numbers decrease

TRACK MARK

. • REVIEW

X • PAUSE

•AMS

1While playing the track with the track mark you want to erase, press X • PAUSE to pause.

To erase the third track mark, play the third track and press X • PAUSE.

2Find the track mark by pressing . slightly.

Find the beginning of the third track. “00:00” appears in the display. “MARK” appears in the display for 2 seconds.

3Press TRACK MARK to erase the mark.

“MARK OFF” appears in the display. The track mark is erased and the two tracks are combined.

z

When you erase a track mark, the settings assigned to the mark are also erased.

29