Note on mechanical noise

The recorder gives off mechanical noise while operating, which is caused by the power-saving system of the recorder and it is not a problem.

On cleaning

•Clean the recorder casing with a soft cloth slightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene as it may mar the finish of the casing.

•Wipe the disc cartridge with a dry cloth to remove dirt.

•Dust on the lens may prevent the unit from operating properly. Be sure to close the disc compartment lid after inserting or ejecting an MD.

•To obtain the best sound quality, use a dry cloth to wipe the plug of the headphones/ earphones. Dirty plug may cause sound distortion or intermittent breaks in the sound.

Note on maintenance

Clean the terminals periodically with a cotton swab or a soft cloth as illustrated.

Terminals

On the battery compartment lid

The battery compartment lid is designed to detach from the recorder when it is handled with great force. Do the following steps to reattach the lid.

Slots

Projections

1Insert the projections on the PUSH OPEN tab firmly into the slots on the recorder one at a time.

2

1

2Insert the projections on the lid firmly into the slots on the PUSH OPEN tab one at a time.

45