Symptom

Cause/Remedy

 

 

 

There is no R-

• There is no R-channel output if the cassette deck or an amplifier is

channel sound

connected with a monaural cord.

output when

, Make sure to use a stereo connecting cord. If, however, the

playing a track

connected equipment is monaural, there will be no R-channel

recorded from a

sound output even with a stereo connecting cord.

cassette deck or

 

 

through an

 

 

amplifier, or when

 

 

listening to sound

 

 

from a cassette

 

 

deck or amplifier.

 

 

 

 

 

The optional foot

• The recorder is not set for foot control unit use.

control unit does

, Set “FOOT SW” in the menu to “SW ON” (page 40).

not work properly.

 

 

 

 

 

 

 

 

While Editing

Symptom

Cause/Remedy

 

 

The lid does not

• The power sources have been disconnected during recording or

open.

editing, or the battery have been exhausted.

 

, Set the power sources again, or replace the exhausted battery

 

with new ones and press x • STOP.

 

 

Editing cannot be

• The power source has been disconnected or a power outage has

done.

occurred during editing.

 

, The editing done to that point is not saved to the disc. Do the

 

editing operation again.

 

 

Track marks

• This is due to the MiniDisc system limitations. When the data of a

cannot be erased.

track is fragmented, the track mark of a fragment under 12 seconds

 

long (recorded in stereo), 24 seconds long (recorded in LP2 stereo

 

mode or monaural mode), or 48 seconds long (recorded in LP4

 

stereo mode) cannot be erased. You cannot combine a track

 

recorded in stereo and a track recorded in monaural; nor can you

 

combine a track recorded with digital connection and a track

 

recorded with analog connection.

 

 

The disc cannot

• The component does not support MDLP.

edit on other

, Edit on other component that support MDLP.

component.

 

 

 

51