Sony MZ-E505 service manual 000Manual, 011XXXS5E, 011OFEJ5E, 011063B5E, 011072A5E, 011LrefPw 5E

MZ-E505

4-3. TEST MODE STRUCTURE

Test Mode

(Display Check Mode)

VOL +
	Manual Mode
x key
VOL +	Servo Mode
	Audio Mode
VOL	Power Mode
	OP Alignment Mode
.
Overall Adjustment Mode
x key
DISPLAY key
x	Self-diagnostic Display Mode
key
>B
x key
Sound Skip Check Result Display Mode
DISPLAY key
(Press and hold down about 3 sec)
	Key Check Mode

Terminate key checking or open the top panel.

4-4. MANUAL MODE

4-4-1. Outline of the function

The Manual mode is designed to perform adjustments and operational checks on the set’s operation according to each individual function.

Usually, no adjustments are made in this mode.

However, the Manual mode is used to clear the memory before performing automatic adjustments in the Overall Adjustment mode.

4-4-2. How to set the Manual mode

1.Set the TEST MODE and turn the control towerd VOL + to set the Manual mode.

Remote control LCD display

000Manual

2.During each test, turn and hold the control towerd > N or

. for a while to move the optical pickup on the sled outer or inner perimeter.

3.Each test item is assigned with a three-digit item number. The 100th place is a major item, 10th place is a middle item, and unit place is a minor item.

				VOL +			: 100th place of mode number
	Change Major
							increase
	Item
				VOL			: 100th place of mode number
		x key					decrease
> N
							: 10th place of mode number
	Change Middle			VOL +
							increase
	Item
				VOL			: 10th place of mode number
		x key					decrease
> N
							: Unit place of mode number
	Change Minor			> N
							increase
	Item
				.	: Unit place of mode number
						decrease
									: Up
			Change Adjustment					VOL +
			Value						: Down
								VOL

Write Adjustment

Value

Xkey : When adjusted value is changed : Adjusted value is written.

When adjusted value is not changed : That item is adjusted automatically.

4.During each test mode, the display is changed from one to another each time DISPLAY key is pressed.

•Address & Adjusted Value Display LCD display

011XXXS5E

address adjusted value

mode number

•Jitter Value & Adjusted Value Display LCD display

011OFEJ5E

jitter value adjusted value

mode number

•Block Error Value & Adjusted Value Display LCD display

011063B5E

	adjusted value
block error value

mode number

•ADIP Error Value & Adjusted Value Display LCD display

011072A5E

	adjusted value
ADIP error value

mode number

•Item Title Display LCD display

011 LrefPw 5E

item title adjusted value

mode number

Note: In the Power mode, the item title display is only displayed.

14