![• Description of the error display codes](/images/new-backgrounds/28322/2832231x1.webp)
• Description of the error display codes
Contents of fault | Display code | Meaning of code | Simplified | Description | |
contents | |||||
|
|
|
| ||
|
|
|
|
| |
No error | 00 | No error | – – – – | No error | |
|
|
|
|
| |
| 01 | Access target address illegally specified | Adrs | An attempt to access an abnormal address. | |
|
|
|
|
| |
Servo system error | 02 | HIGH TEMP | Temp | HIGH TEMP | |
03 | FOCUS ERROR | Fcus | Focus | ||
| |||||
|
|
|
|
| |
| 04 | SPINDLE ERROR | Spdl | Abnormal rotation of disc | |
|
|
|
|
| |
TOC error | 11 | TOC ERROR | TOC |
| |
12 | READ DATA ERROR | Data |
| ||
|
| ||||
|
|
|
|
| |
Power system error | 22 | LOWBATT | LBat | Instantaneous interruption detected. | |
| 31 | OFFSET ERROR | Ofst | Offset error | |
Offset error | 32 | FE_ABCD_OFFSET_ERR | ABCD | FE ABCD Offset error | |
| 33 | TE_ABCD_OFFSET_ERR | TE | TE ABCD Offset error | |
| 34 | X1_TE_OFFSET_ERR | X1TE | X1 TE ABCD Offset error | |
|
|
|
|
|
4-6-3. Clearing the error display code
After servicing, reset the error display code.
1.Set the TEST MODE.
2.Press the DISPLAY key on the remote control activates the self- diagnosis display mode.
3.To reset the error display code press X key on the remote con- trol when the code is displayed.(except for R_ - - - - display) (All the data on the 1, N, N1 and N2 will be reset)
4.Press X key on the remote control again.
16