Sony MZ-N1 control, or name, recorder, (G-PROTECTION), Operation on the, Operation on the remote, If the play does not start, viewing track numberpress to enter

To	Operation on the	Operation on the remote
	recorder	control
Select a track directlyTurn the jog dial, and then		—
viewing track numberpress to enter.
or name.
Find the beginning of	Press .. Press.Turn the..cont
the current track1)	repeatedlyTuntilrntheyou.contre
	beginning ofrepeatethe desirelyun
		beginning of
Find thePrb>essginning. Turnof the con
2)		N>.
the next track
Go backwaPredss..whileandholdTurn and hol
playing		towards..
Go forwardPresswhile>and. holdTurn and hol
playing		towardsN>.
Pause	FlipX.theFlipPressXbar. towards
	towardsXagain	PresstoXresumeagain to
	play.

Remove the MD x FlipandPressxtheandbaropento open3)the lid.

1)If you. twicepress continuously while pla beginning of the last track on the

2)If you> duringpress the last track of the on the disc.

3)Once you open the lid, the point to the disc information is stored to t

If the play does not start	3 Turn the jog dial until“HeadPhone” flashes
Make sure the recorder is not locked (pages 17, in the display, and then press to enter.
72).	z
Suppressing the skips of the sound	• The playback mode will switch automatically
(G-PROTECTION)	(stereo, LP2 stereo, LP4 stereo, or monaural).
The G-PROTECTION function was developed	• To play only the tracks in a certain group, see
to provide a higher level of shock resistance	“Using the group function (Group Mode)”
	(page 40).
than that of existing players.
	• The volume setting can be stored to the
Note
	Personal Disc Memory (page 69).
The playback sound may skip if:

• the recorder receives stronger continuous shock.

• a dirty or scratched MiniDisc is played.

When using the headphones/ earphones connect them directly to the recorder

1Press the jog dial.

2Turn the jog dial until“AUDIO OUT” flashes in the display, and then press to enter.

27