Sony MZ-N1 area, more, Press, On the recorder, On the recorder, On the recorder, Press the jog dial, On the remote control, a track, group, or disc

Storing phrases from a previously labeled track, group, or disc.

On the recorder

• Storing phrases from a previously labeled track, group, or disc:

You can store an existing track, group, or disc name as a phrase.•Inputting and storing phrases:You can store frequently used phrases in1 Follow steps 1 and“Relabeling2 of

advance, and then retrieve and use them		recordings” (page 53) and display the
when labeling a track, group, or disc.		track, group, or disc name that
		contains the phrase that you want to
Storing phrases while labeling	2	store.
a track, group, or disc		Press./> repeated
On the recorder		the cursor to t
	3
1 Follow steps 1 to“Labeling7 of		Press END SEARCH for 2 seconds
		more to store the phrase.

recordings” (page 51) to enter a

phrase. On the remote control

2

3

1 Follow steps 1 and 2“Onof the remote

After entering the phrase, press control” in “Relabeling recordings” CANCEL to remove the cursor from(page 54) and display the track, group, or

the character palette to the letter inputdisc name that contains the phrase that you

area want to store.

2Pull and turn the control towards VOL + or

Press END SEARCH for 2 seconds orVOL – to move the cursor to the right of the

more.phrase.

“Entry!” appears in the display and		3 PressX for 2 seconds
		phrase.
the cursor flashes after the phrase you
just stored.		Entering and storing phrases
4 If you continue labeling operation, do
steps 5 to 7“Labelingof	recordings”	On the recorder
(page 51).		1	Press the jog dial.
On the remote control
		2	Turn the dial until“EDIT” flashes in
1 Follow steps 1 to 6“Onof the remote
control” in “Labeling recordings” (page 52)			the display, and then press to enter.
to enter a phrase.
2 After entering the phrase, pressX for 23			Turn the jog dial“Nameuntil Bank”
seconds or more.			flashes in the display, and then press
3 If you continue labeling operation, do steps 5			to enter.
to 6 of“On the remote control” in “Labeling		4	Follow steps 5 to“Labeling7 of
recordings” (page 52).

recordings” (page 51) to enter a phrase and then press the jog dial for 2 seconds or more.

“Entry!” appears in the display and the phrase is stored.

55