Sony MZ-N1 STR:001, END:001, Registering tracks or groups as a new group (Group Setting), on), them, GROUP, group, Group, Group, Group, DISPLAY, Control, register

Registering tracks or groups as a new group (Group Setting)

Note

•It will not be possible to make a group setting if the tracks, groups and disc name on a disc exceed the maximum number that can be input.

Do the following procedure to register	GROUP
tracks or groups as a new group. The
tracks or groups must, however, be
sequential. If the desired tracks or groups
are not consecutive, you must move them
to make them consecutive before you can
register them“Moving( recorded tracks”,	Jog dial
page 60). The operation of this function
	DISPLAY
depends on whether group mode is on or
off.
• When group mode is ON:
— Several groups are registered as one
group.
— A track without a group setting can
be registered to an existing group.	Control
• When group mode is OFF:		x

Several tracks are registered as one
group.	On the recorder
The following section explains the
	1 Press GROUP for 2 seconds or mo
operation when group mode is on.
	to turn group mode on.

					Group				Group		2 While the recorder is stopped, pre
	1	2	3	4	5	6	7	8		9	the jog dial.
											3 Turn the dial until“EDIT” flashes in
	Making a new				Making a new group
group with					with 2 groups.						the display, and then press to enter.
tracks 1 to 3.											4 Turn the jog dial“until: Set”
	Group					Group
											flashes in the display, and then press
	1	2	3	4	5	6	7	8		9
											to enter.
											The track number of the first track
• Registration of non-consecutive tracks											(“STR”) appears in the display.
	is not possible (for example, track 3 and
	tracks 5 to 7 cannot be registered to a										STR:001
	new group).										END:001

• Tracks always appear according to their	:
order on the disc, not their order within
the group (even when group mode is
on).

58