Erasing a track mark

Notes

• When you erase a track mark between the two

consecutive tracks that are registered into

When you record with analog (line) input,different groups while group mode is off, the unnecessary track marks may be recordedsecon track is re-registered into the group where recording level is low. You cancontaining the first track. In addition, if you

 

combine a track that is registered to a group

erase a track mark to combine the tracks

 

with a track that is not registered to a group

before and after the track mark. The track
numbers will change as follows.

(two consecutive tracks), the second track

takes the same registration setting as the first

You cannot erase a track mark on a track

track. However, when group mode is on, you

that has been checked-out from yourcan only combine tracks within the selected

computer.

 

 

 

 

group.

 

 

 

 

 

 

 

• You cannot erase track marks according to the

 

1

 

2

3

4

 

system limitations. For details,“Systemsee

limitations” (page 77).

Erase a track mark

1 2 3

Track numbers decrease Control bar (X/.)

T MARK

Erasing tracks

Note

You cannot erase tracks that have been checked out from your computer. You cannot erase a group or an entire disc if it contains a checked- out track. In this case, check in the track or tracks to OpenMG Jukebox.

Control bar (x)

1 While playing the track with the track mark you want to erase, flip the bar towardsX to pause.

2 Find the track mark by pressing.

slightly.

CANCEL Jog dial

For example, to erase

thir

DISPLAY

 

mark, find the beginning of th track“00:00” appears. in the display.

“MARK” appears in the display for 2 seconds.

3 Press T MARK to erase the mark.

Control

“MARK OFF” appears in the display.

The track mark is erased and the two

x

 

tracks are combined.

 

z

When you erase a track mark, the date, ti and name assigned to the mark are also er

64