Sony MZ-N1 Troubleshooting, poorly, Symptom, dealer. Refer, Cause/Solution, The recorder does, not work or works, 3 Connect the power source

TroubleshootingShould any problem persist after you have made these checks, consult y

dealer. Refer“Messages”to (page 90) as well.

Symptom	Cause/Solution
The recorder does• Audio sources may not be securely connected.
not work or works ,Disconnect the audio sourc
poorly.	(pages 20, 29).
	• The HOLD function is turned on (“HOLD” appears in the display
	when you press an operation button on the recorder).
	,On the recorder, disable H
	the opposite direction of
	• The lid is not firmly closed.
	,Close the lid until it cli
	• Moisture has condensed inside the recorder.
	,Take the MD out and leave t
	several hours until the mo
	• The rechargeable battery or dry battery is weak (“LOW BATT”
	flashes or nothing appears).
	,Charge the rechargeable ba
	the new one (page16), or c
	adaptor to the recorder.
	• The rechargeable battery or dry battery have been inserted
	incorrectly.
	,Insert the battery correct
	• When recording digitally from a portable CD player, you did not use
	AC power or did not disable the anti-skip function such as ESP
	(page 22).
	• The analog recording was made using a connecting cord with an
	attenuator.
	,Use a connecting cord with
	• The AC power adaptor was unplugged during recording or a power
	outage occurred.
	• While operating, the recorder received a mechanical shock, too
	much static, abnormal power voltage caused by lightning, etc.
	,Restart the operation as f
	1 Disconnect all the power sources.
	2 Leave the recorder for about 30 seconds.
	3 Connect the power source.
	• The disc is damaged or does not contain proper recording or editing
	data.
	,Reinsert the disc. Rerecor
	appears, replace it with a
	• Recording level is too small to record (when recording manually).
	,Pause the recorder and adj

79