Sony MZ-N1 setting, To release a group

5 Turn the jog dial until the number

the desired first track flashes in theTo release a group display, and then press to enter. setting

This selects the first track of the new

group. • Insert a disc with group settings.

Even when group mode is on, trackControl bar (x) numbers appear according to their

order on the disc, not their order within the group.

6 Turn the jog dial until the number of the desired last track flashes in the display, and then press to enter.

This selects the last track of the new group.

GROUP Jog dial

7 Label a group (see steps 5 to 8 of				DISPLAY
	“Labeling recordings” (page 51)).
On the remote control
1	Press DISPLAY for 2 seconds or more.
2	Turn the control repeatedly until“GROUP”
	flashes in the display, and then press x	to		Control
	enter.				x
3	Turn the control repeatedly until“GROUP
	ON” appears in the display and then press x
	to turn group mode on.
4	Press DISPLAY for 2 seconds or more.		On the recorder
			1 Press GROUP for 2 seconds or mo
5	Turn the control repeatedly until“GP:Set”
	flashes in the display, and then press x	to
	enter.			to turn group mode on.
			2 Select a group that you want to
6	Turn the control repeatedly until the number
	of the desired first track flashes in the			release and check the contents (s
	display, and then pressxto enter.
				“Selecting and playing groups (Group
7	Turn the control repeatedly until the number
				Skip Mode)” (page 41)).
	of the desired last track flashes in the display,
	and then press to enter.
8	If you continue labeling operation, do steps 53 Flip the bar towardsx.

to 7 of“On the remote control” in “Labeling	4 Press the jog dial.
recordings” (page 52).

Notes	5	Turn the dial until“EDIT” flashes in
		the display, and then press to enter.
• In step 5, the first track must be either the first
track of an existing group or a track that does6		Turn the jog dial“	: Release”
not belong to a group.		flashes in the display, and press to
• When selecting the last track in step 6, make
		enter.
sure the track comes after the one selected in
		“Release?” and “PushENTER”
step 5. The last track must be either the last
track of an existing group or a track that does		appear in the display.
not belong to a group.

continued

59