Sony MZ-N1 more, right, PressN, upward or, downward), Operations, Functions1), To move the, Control bar, cursor in the, (move the cursor, character in the

The buttons used for character input		1) Functions of the buttons or the control may
and their functions are listed below.		differ depending on when the cursor is in the
Functions1)	Operations	letter input area or in the character palette.
		2) If you have stored phrases that you often use in
To move the	Control bar
		the name bank, the first phrase stored appears
cursor in the	up	in the display (page 54).
character palette.left		7 Repeat step 6, and then enter all
	right	characters of the label name.
		8 Press the jog dial for 2 seconds o
	down
	Turn the jog dial	more.
		The disc is labeled.
	(move the cursor
	upward or	On the remote control
	2)
	downward).	1 Insert a disc and do the following operations.
To select a Turn the jog dial.
		To label a track:
character in the		Start playing or recording the track you want
letter input area.		to label, and then label the track while the
		recorder is playing or recording.
To enter a letter.	PressN
		To label a group:
	Press the jog dial.
		Turn group mode on (page 32) and start
To moveFlipthe the barpl ying or rectowardsrding the ack within the
cursorx.from the group you want to label, and then label the
letter input areagroup while the recorder is playing or
to the characterecording.
palette.		To label a disc:
		Label a disc while the recorder is stopped or
To movePressthe GROUP/
		recording. If the disc has group settings, turn
cursorCANCELfromthe. group mode on (page 32).
character palette
		2 Pr ss DISPLAY for 2 seconds or more.
to the letter input3 Turn the control repeatedly until“EDIT”
area.		flashes in the display, and then press x to
		enter.
To enter a name. Press the jog
		4 Turn the control repeatedly until the
	2 seconds or more.
		following item appears in the display, and
	PressNfor 2 then pressx to enter.
	seconds or more.		: Name”
		When labeling a track: “
		When labeling a group: “GP: Name”
To insePressta blankVOLUME +.
space before theWhen labeling a disc: “			: Name”
cursor.		The cursor flashes in the display and the
		track, group, or disc is ready to be labeled

To delete a –letter.. Press VOLUM

To display “:”,	Press T MARK
“–” or “/” at the	repeatedly.
input position in
the letter input
area.
To cancel	Press CANCEL in
labeling.	the letter input area.

52