Sony MZ-N1 Editing recorded tracks, ABCDEFGHI abcdefghi, Labeling/relabeling recordings, disc, Notes, @ _ ` +, alphabet, per disc, characters, characters, • Numbers 0 to

About the character palette

During operations on the recorder, characters can be selected from the character palette in the display. The character palette has the follow configulation.

Letter input area

The cursor flashes.

ABCDEFGHI abcdefghi

Editing recorded tracks

You can edit your recordings by adding/The number of titles that can be stor erasing track marks or labeling tracksdiscanddepends on the number of

MDs. Premastered MDs cannot be editedcharacters. that are input for track n

• You cannot edit tracks on an MD that is group names, and disc name. record-protected. Before editing tracks, close

the tab on the side of the MD (page 75).

• If you perform an editing operation while playing, editing results will not be recorded until you stop the recorder“TOCand Edit”

disappears in the display.

• Do not move or jog the recorder while“TOC

Edit”* is flashing in the display.

•The lid does not open until“TOC Edit” disappears in the display after editing.

• When the group mode is on, editing can be performed only for the tracks registered into the selected group.

∗ ΤΟΧ = Ταβλε οφ Χοντεντσ

Labeling/relabeling recordings

You can name tracks, groups and discs

using the recorder’s character palette.		Character palette
Available characters	Since only a part of the character pa
• Capital and small letters of the English	is visible on the display, use the con
alphabet	bar to move the cursor and enter
	characters.
• Numbers 0 to 9
	Notes
• ! " # $ % & ( ) * . ; < = > ?
@ _ ` + – ' , / : _ (space)	• “NAME FULL” appears when you try to enter
		more than 1,700 characters on a disc. Enter a
Maximum number of		shorter name for the track, group, or disc
		(page 53), or set the “LP Stamp” setting to
characters per name
		“Stamp OFF” when recording in MDLP mode
Track names, group names, and discso that “LP:” is not added at the beginning of
		the track name (page 30).
name: Approx. 200 each (containing a

mixture of all available characters) • When labeling a disc which has been recorded

	using the group function, make sure group
Maximum number of	mode is on in order to prevent the group
	management information from being
characters that canbe input
	overwritten by mistake.
per disc
	• If you enter the symbol“//” between the
	characters in disc names such as “abc//def”,
Alphanumeric characters and symbols
only: Approx. 120 titles of about 10	you may be unable to use the group function.

characters each (a maximum of about 1,700 characters)

50