Sony MZ-N1 Adding track marks automatically (Auto Time Stamp), OFF, Time, until, Select, Display, 5-minute, Jog dial, Time Stamp:, Turn the jog dial

“OFF” flashes in the display.

2 Turn the jog dial“TIMEuntil MARK” flashes in the display, and then press to enter.

Example: Eight minutes of recording has been completed when the Auto Time Stamp time interval is set to 5 minutes. A track mark will be added at the 8- minute point (after the start of recording) and after each 5-minute interval thereafter.

Adding track marks automatically (Auto Time Stamp)

Using Auto Time Stamp to add track marks while recording

When the elapsed recording time exceeds the time interval for Auto

Time Stamp:

Use this feature to add track marksThe recorder adds track marks at the point automatically at specified intervals when

you set the time interval and from thatrecording through the analog input point the recorder adds a track markconnector or a microphone. whenever the time interval has elapsed.• This function can be set with the recorder only.

Jog dial

When the time interval set for AutoTime Stamp exceeds the elapsed1 While the recorder is recording orrecording time:

recording pause, press the jog dialThe. recorder adds track marks when the set Auto Time Stamp time interval has elapsed.

Example: Three minutes of recording has been completed when the Auto Time

3 Turn the jog dial until the desiredStamp time interval is set to 5 minutes. A track mark will be added at the 5-

time interval flashes in the display,

and then press to enter. minute point (after the start of recording) and after each 5-minute interval

Select one of the following intervals. thereafter.

Display	Time
OFF	—
5 min. ON	Approx. 5 min.
10 min. ON	Approx. 10 min.
15 min. ON	Approx. 15 min.

To cancel Auto Time Stamp

Select“OFF” in step 3 or stop recording.

z

“T” appears before the time display on the recorder for track marks added by Auto Time Stamp, and “T” appears after the time display on the remote control.

Notes

•Automatic track marking by Auto Time Stamp starts when you add a normal track mark to

the disc (i.e., by pressing T MARK or flipping the bar towardsX, etc.).

•The setting will be lost when the recording stopped.

35