•Digital synchro-recording — When recording from a digital equipment with optical output, the recorder automatically starts and pauses recording in sync with operation on the digital source.

•Digital REC level control.

•Long-time recording with monaural sound — You can record up to 160 minutes (when using 80 minutes recordable MD) on a disc using monaural recording.

•Date and time stamp function — The built-in clock automatically records the date and time whenever you make a recording.

•Digital AGC (Auto Gain Control) — Automatic recording level adjustment without sacrificing superb digital sound.

This manual is for models MZ- R90 and MZ-R91.

The MZ-R90 appears in the instructions for illustration purposes. Though they differ in appearance, the models share the same functions and are operated in the same way.

For detailed specifications, see page 49.

MZ-R90

MZ-R91

How to use the jog lever.
Flip to select

Push to enter

The jog lever can be used to perform various operations during playback, recording, and editing, as well as when the recorder is stopped. Flip the jog lever to select an item in the display. Then press the jog lever to enter your selection.

About the i/LINE OUT jack on the recorder.

The parameter (“AUDIO OUT”) for the GB i/LINE OUT jack must be set to “HeadPhone” if you want to connect headphones other than the supplied set, or

to “LINE OUT” if you want to connect another component to the recorder through a line cable. There is no need to make this when using the supplied headphones with remote control since it is done automatically.

To set the “AUDIO OUT” parameter for the i/LINE OUT jack, do the following procedure:

1Press the jog lever, flip until “AUDIO OUT” flashes in the display, and then press the lever again.

2Flip the jog lever until “HeadPhone” or “LINE OUT” flashes in the display.

3Press the jog lever when the item you want to select is flashing.

Notes

•When the “AUDIO OUT” parameter is set to “LINE OUT”, the VOL +/– buttons and the Mega Bass function become inoperative. To make them operative, set the “AUDIO OUT” parameter to “HeadPhone”.

•The “AUDIO OUT” parameter is automatically set to “HeadPhone” when you turn off the power.

3-GB