Messages

If the following error messages flash in the display window, check the chart below.

Error messageMeaning/Remedy

 

 

BLANKDISC

• An MD with no recording on it is inserted.

 

,Insert a recorded MD.

 

 

DISC ERR

• The disc is damaged or does not contain proper recording or

 

editing data.

 

,Reinsert the disc. If this fails, rerecord.

 

 

DISC FULL

• There is no more space to record on the disc (less than 12 seconds

 

available).

 

,Replace the disc.

 

 

Data Save

• The MD player is recording information (sounds) from the

 

memory to the disk.

 

,Wait until this process is completed. Do not expose the player

 

to any physical shock, nor disrupt power supply.

 

 

TOC Edit

• The MD player is recording information (track start and end

 

position) from the memory to the disk.

 

,Wait until this process is completed. Do not expose the player

 

to physical shock, nor disrupt power supply.

 

 

BUSY

• You tried to operate the recorder while it was accessing the

 

recorded data.

 

,Wait until the message goes out (in rare cases, it may take 2–3

 

minutes).

 

 

NAME FULL

• You tried to enter more than 200 letters to label a single track or

 

disc.

 

• You tried to enter a total of more than 1700 letters for track or disc

 

names during playback or stop.

 

,Enter the characters within the limit.

 

 

Hi DC in

• Voltage of the power supply is too high (The supplied AC power

 

adaptor or the recommended car battery cord is not used).

 

,Use the supplied AC power adaptor or the recommended car

 

battery cord.

 

 

HOLD

• The recorder is locked.

 

,Slide HOLD against the arrow to unlock the recorder

 

(page 27).

 

 

LOW BATT

• Batteries are weak.

 

,Charge the rechargeable battery or replace the dry battery

 

(page 39).

 

 

MEM OVER

• You tried to record with the recorder placed where it receives

 

continuous vibration.

 

, Put the recorder on a stable place, and start recording again.

 

 

46-GB