z

You can store phrases from a previously labeled track or disc.

Do the procedure “Relabeling recordings” (page 35) and display the track or disc name that contains the phrase that you want to store. Press VOL +/– repeatedly to move the cursor to the right of the phrase. Then press X for 2 seconds or more to store the phrase.

Storing phrases using the EDIT menu

1 Press the jog lever so that “EDIT” flashes in the display, and then press the lever again.

2 Flip the jog lever until “Name Bank” flashes in the display, and then press the jog lever.

3 Enter the phrase you want to store, and then press the jog lever for 2 seconds or more.

“Entry” appears in the display and the phrase is stored.Retrieving phrases stored in the phrase bank

You can retrieve a phrase stored in the phrase bank anytime you want to use it in a track or disc name.

There are two ways to retrieve a stored phrase: by displaying the stored phrases one by one during the labeling procedure, or by searching the phrase bank by the first letter of the desired phrase.

Searching for a phrase by displaying the stored phrase one by one1 Do the procedure “Labeling recordings” (page 32) until“: Name” or “ : Name” flashes in the display. Then press the jog lever.

2 Press Xrepeatedly until the first phrase stored in the phrase bank appears in the display.

36-GB
3 Flip the jog lever or press ./> repeatedly.

Flipping the jog lever or pressing the buttons causes the phrases stored in the phrase bank to appear one by one in sequential order. If you press Xat this time, the first phrase stored in the phrase bank retrieved.

4 Press the jog lever while the phrase you want is shown in the display.

The cursor flashes after the phrase you just retrieved. You can then continue with labeling operation.

Searching for a phrase by its first letter

1 When labeling a track or disc, use VOL +/– to move the cursor to the letter which the desired phrase begins with.

2 Press Xto search.

The phrase for that letter appears in the display. If there are two or more phrases that start with that letter, press

Xto see the next phrase.3 Press the jog lever while the phrase you want is shown in the display.

The cursor flashes after the phrase you just retrieved. You can then continue with labeling operation.

Erasing phrases

You can erase phrases from the phrase bank while the recorder is stopped. You can also erase phrases when the recorder is empty.

1 Press the jog lever so that “EDIT” appears, and then press the lever again.2 Flip the jog lever until “BankErase” appears, and then press the lever.