To

Press

 

 

Record from the end of the previousEND SEARCH and slide REC.

recording

 

 

 

Record partway through the previousN, > or .to find the start point of

recording

recording and press x to stop. Then slide

 

REC.

 

 

Pause

X1)

 

Press Xagain to resume recording.

 

 

Remove the MDxand open the lid.2) (The lid does not open

 

while “TOC Edit” flashing in the display.)

 

 

1)A track mark is added at the point where you press X again to resume recording while pausing; thus the remainder of the track will be counted as a new track.

2)Once you open the lid, the point to start recording will change to the beginning of the first track. Check the point to start recording on the display.

If the recording does not start

Make sure the recorder is not locked (page 27).

Make sure the MD is not record-protected (page 42).

Premastered MDs cannot be recorded over.

For models supplied with the AC plug adaptor

If the AC power adaptor does not fit the wall outlet, use the AC plug adaptor.

Note

If the power supply is disrupted (i.e. the battery is removed or becomes exhausted or the AC power adaptor is disconnected) during a recording or editing operation, or while “TOC Edit” appears in the display, then it will not be possible to open the lid until power is restored.

z

The level of the recorded sound is adjusted automatically.

You can monitor the sound during recording. Connect the supplied headphones with remote control to i/LINE OUT and adjust the volume by pressing VOL +/–. This does not affect the recording level.

8-GB