Disconnect the USB cable from the camera and the computer.

" Notes

Before turning off your camera, disconnect the USB cable following the proper procedures described above.

Disconnect the USB cable using the proper procedures described above. Otherwise, files stored on the "Memory Stick PRO Duo" may not be updated correctly. Also, disconnecting the USB cable improperly Illay cause a malfunction of the "Memory Stick PRO Duo".

Using your Macintosh computer

You can copy images to your Macintosh computer.

"Picture Motion Browser" is nol compatible with Macintosh computers.

Recommended computer environment

The following environment is recommended for a computer connected to the camera.

OS (pre-installed): Mac OS 9, 1/9,2/ Mac

OS X(vIO.l to vIOA)

USB jack: Provided as standard

CPU: iMac, eMac, iBook, PowerBook, Power Mac G3/G4/G5 series, Mac mini

Memory: 64 MB or more (128 MB or more is recommended)

" Note

Operations are not guaranteed for all the recommended computer environments mentioned above.

If you connect two or more USB devices to a single computer at the same time. some devices, including your camera, Illay not operate depending on the types of USB devices you are ustng.

Operations are not guaranteed when using a USB hub .

Connecting your camera using a USB interface that is compatible with Hi-Speed USB (USB 2,0 compliant) allows advanced transfer (high speed transfer) as this camera is compatible with Hi- Speed USB (USB 2.0 compliant).

There arc three modes for a USB connection when connecting a computer, [PictBridgel, [Web Cameral and IMass Storage I (default setting) modes. This section describes the [Mass Storage] as an example. For details on [PictBridge], see "Network Sharing Camera Handbook" .

.• When your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time.

20

Page 20
Image 20
Sony NSC-GC1/GC3 OS pre-installed Mac OS 9, 1/9,2/ Mac, Disconnect the USB cable from the camera and the computer