Sony NSX-A777 manual Insert tapes into deck 1 and deck, About cassette tapes, English

If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily.

Press +4 or - during playback referring to the playback side indicator (~ or -) on the display.

For example, when PP is pressed while F is displayed, playback of the next track starts.

Music sensor function may not be able to detect tracks under the following conditions:

●Blanks of less than 4 seconds between tracks

●Noisy blanks

●Long passages of low-end sound

. Low overall recording levels

4

11

.>:—–—–—–———–

After playback on one deck finishes, the tape in the other deck will start to play without interruption.

1 Insert tapes into deck 1 and deck 2.

2 Press TAPE/DECK 1/2 to select the deck to be played back first.

3Press REV MODE to select Z).

4Press 4P to start playback.

Playback continues until ■ is pressed,

About cassette tapes

●To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

Side	A
	&
	(@
\	:(@>
W
	;@@	Y
	Type 11tape	Tab for side A
	detection
	slot	*
	%-	/

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape detection slot.)

●120-minute or longer tapes are extremely thin and easily deformed or darnaged. They are not recommended.

●Take up any slack in the tape with a pencil or similar tool before use, Slack tape may break or jam in the mechanism.

ENGLISH 17