Sony NT-2 manual Recording with a microphone

mRecording with a microphone

Using the stereo microphone (supplied)

You can attach the microphone to your clothing (for example, your tie or collar). The clip rotates as illustrated.

Clip

To adjust the sensitivity of the microphone

Set the MIC SENS switch to H (high) or L (low) according to the recording condition while monitoring with the headphone.

H:To record a remote or quiet sound L: To record a close or loud sound

MIC SENS

L H

When the following indications flash “REC” and “PROTECT”

The cassette is record-protected. Release the record-protect or insert a new cassette. (pages 25, 31)

“REC” “PROTECT” and “9 REV”

The REV side of the cassette is record- protected.

“REMAIN”

The remaining time of the tape (of one side) is less than about 4 minutes. In this case, you cannot change the DIR MODE ( direction mode).

To mix sound from two audio sources

Connect the microphone to the MIC jack and connect another piece of audio equipment to the LINE IN jack of the recorder. You can record the sound from both sources mixed together. In this case you cannot adjust the sound balance.

14-EN