Sony NT-2 manual Precautions, On the AC power adaptor, On installation, On handling, On battery

Precautions

On the AC power adaptor

•Use only the AC-NT2 AC power adaptor (supplied). Do not use any other AC power adaptor.

Polarity of the plug

•The recorder is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the recorder itself has been turned off.

•If you are not going to use this recorder for a long time, be sure to disconnect the power supply (AC power adaptor, dry battery). To remove the AC power adaptor from the wall outlet, grasp the adaptor plug itself: never pull the cord.

On installation

Do not install the unit in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

On handling

Do not drop or hit the unit. Doing so may cause a malfunction in the unit.

On battery

Incorrect battery usage may lead to leakage of battery fluid or bursting batteries. To prevent such accidents, observe the following precautions:

•Install the + and – poles of the battery correctly.

•Do not try to recharge the battery.

•When the unit will not be used for a long time, be sure to remove the battery.

•If a battery leak should develop, carefully and thoroughly wipe away battery fluid from the battery compartment before inserting a new one.

•Batteries and metal should not be put together. If the + and – poles of the battery touch metal, a short circuit may result.

24-EN