Sony NT-2 Listening with a stereo system, To play only one side To play both sides continuously

Listening with a stereo system

Connect another piece of audio equipment such as a stereo system.

to LINE OUT		a stereo system,
	to LINE IN	etc.
		DIR MODE

Ï p EJECT

1 Connect the line cable (supplied) to the LINE OUT jack of the recorder, and then connect the other side of the cable to the LINE IN jack of your stereo system.

2 Insert the tape with the side you want to listen to facing the cassette holder.

3 Select DIR MODE (direction mode).

A: To play only one side.

a: To play both sides continuously*.

*The recorder plays three times continuously and then automatically stops for protecting the tape.

4 Press Ï.

Playback starts.

5 Adjust the volume on the stereo system.

Note

•If you connect the line cable to your stereo system before connecting it to the recorder, noise may be heard.

18-EN

•While the headphones are connected to the recorder, the playback volume from the headphones may be lowered if you connect a stereo system to the recorder.