This is the Internet version of the user’s guide. © Print only for private use.

You can choose to use any sound recording or audio file. You can select ring signals that are stored on your phone or on a Memory Stick. If the selected file is later deleted or moved, the Default Melody will be played instead.

To listen to the selected ringtone or alert

1.Tap the icon to listen to the signal.

2.Tap again to stop playback.

To change the default ring tone or alert

1.Tap the drop-down menu.

2.Select Default Melody for the P910a default or Find sound to select a new one.

3.If required, change folder.

4.Select the required sound

5.Tap and to preview the sound.

6.Tap Select to set this sound.

Warning! The volume may be uncomfortably loud at the higher volume levels if the phone is close to your ear. Exposure to excessive volume may damage hearing.

To set vibrating alert, silent mode, speakerphone, or mute the microphone

• Tap the volume icon on the status bar.

Calls tab

These settings set incoming call alerts. For more information see ‘Ring signals’ on page 145.

You may personalize the ring melodies further for individual contacts, see ‘To change the details of a contact’ on page 104.

•Ring (voice) – Select a ring signal for incoming voice calls.

•Ring (voice) line 2 – Select a ring signal for incoming voice calls.

•Ring (data) – Select a ring signal for incoming data calls.

•Ring volume – Set the preferred sound level for handheld, handsfree and car use.

•Increasing ring – Select the checkbox to use increasing ring signals. This disables the other volume settings.

Messages tab

These settings set messaging alerts.

•Display notification message – Select the check box to receive notification of a received message.

•SMS – Select an alert for received SMS messages.

•Email – Select an alert for received Email messages.

•MMS – Select an alert for received MMS messages.

150 Control panel