This is the Internet version of the user’s guide. © Print only for private use.

Area Information is a type of text message that is sent to all subscribers in a certain network area, for example a local traffic report.

To enable Cell Information

Select the Cell information check box

To turn Area Information on

1.Check the Area information check box. Received messages will be automatically stored, and displayed in the list when dismissed.

2.The list shows all the channels that you have defined on your P910a. The check box for each channel shows if it is on (selected, ready to receive messages) or off (cleared, not active):

To add a new channel

1.Select New.

2.Enter the number of the new channel in the New Channel dialog. Channel numbers can be from 0 to 999. If there are too many channels defined, New will be disabled and you will

see a message: Maximum channels on SIM.

Channel numbering is operator-dependent. Please consult your network operator for information.

To turn a channel on or off

Select the channel in the list and select the check box. To turn it off, clear the check box.

To delete a channel

Select Delete. Since deleting a channel cannot be undone, you will be asked to confirm the delete. Deleting the channel will also delete any stored Area Information messages for that channel in your Area Info Inbox.

WAP accounts

Use these settings to set up and manage WAP accounts on your P910a.

WAP accounts are intended for multimedia messages and for accessing the Internet through a WAP gateway. (Such gateways make use of proxy port 9200-9203.) All other proxy settings should be included in your Internet accounts.

For security reasons, some WAP pages and services, for example online banking, can only be accessed from a particular WAP account.

The dialog has two tabs: Basic and Preferred.

Basic tab

The dialog shows a list of all the WAP accounts on your P910a. You can add a New account to the list and Edit or Delete an existing account.

Control panel

165