This is the Internet version of the user’s guide. © Print only for private use.

Mute – Silence the ring signal. The calling party will not notice that you have silenced the call. The call will be logged as a missed call.

You can also answer by voice control, see ‘Voice control’ on page 52.

Options during or after a call

There are several options available, depending on the situation. You can access some of them using the screen buttons, by tapping the field with the calling party details, or on the menus.

Options that concern two or more active calls are described in ‘Handling two or more calls’ on page 45.

End call – End the active call.

New call/Hold call/Retrieve call – Put the active call on hold/

retrieve the held call.

Add to contacts – Create a new Contacts entry. This option appears automatically after a call if the phone number of the call is known, and not already stored in Contacts. See ‘Add to contacts’ on page 53.

Show contact – Display the entry in Contacts, if any, that corresponds to the phone number of the active call.

Copy number – Copy a phone number to the clipboard.

Paste number – Paste a copied number into a field

Tap to make the following adjustments:

Call volume – Adjust the volume in the phone. This is easier to do with the Jog Dial.

Vibrating alert – Set when the vibrating alert should be active.

Silent mode – All sounds, for example ring signals, will be turned off.

Speakerphone – Activate the P910a as a speakerphone.

Mute microphone – Turn the microphone on or off.

Handling two or more calls

During a call, you can make a second call, or answer an incoming call. The ongoing call is put on hold and the new call becomes active. The held call is shown with a grey background.

If someone calls when a call is on hold, you will be asked if you want to release the held call and answer the incoming call.

When an active call is finished, you are asked to retrieve the held call. If you do not respond within a few seconds, the held call will also be finished.

45 Phone