This is the Internet version of the user’s guide. © Print only for private use.

SIM card will be disabled and you need to contact your network operator.

You cannot change the PUK code.

PIN2

Some functions on the SIM card can be protected by a secondary code feature. Some SIM cards do not have a PIN2 lock.

The PIN2 lock cannot be deactivated. The code can be changed by a user who knows the old code.

Device lock

The device lock protects your P910a and the data in it against unauthorized use.

If the device lock is set to When SIM changed, it means that the P910a is not normally locked. However, if the SIM has been changed, the P910a asks you to enter the code to unlock the P910a before you can use it. This means that if someone steals your P910a and puts another SIM card into it, they will not be able to use it.

Note Your operator can block your SIM, if you report that your phone has been stolen.

The device lock is not on when you buy your P910a. You can change the device lock code to any four to eight digit personal code.

The default device lock code is 0000.

To activate the device lock

1.Select Control panel > Device > Locks.

2.Select a lock option.

3.Select Done.

You can choose to have the P910a locked every time you turn it on, locked when the SIM card has been changed, or unlocked.

It is also possible to use the device lock in combination with the screen saver. Just mark the checkbox Control panel > Device >

Display > Screen > Screen saver device lock to have the device lock

activated when the screen saver goes on.

Note When using the screen saving device lock, make sure you have set the device lock to activate at Power on. Otherwise your P910a will be unprotected after Power on, until the screen saver goes on.

Note You will not be able to browse the contents of your P910a from a PC, or synchronize items using the SyncStation, when the P910a device lock is enabled and active.

Getting to know your P910a

38